AVR-A10H
13.4-channel AV receiver with 150 W per channel, 8K HDMI, Dolby Atmos and built-in HEOS streaming. Aimed at home theater owners who want a high-power, multi-zone receiver with up to seven HDMI inputs and four independent subwoofer outputs.
- 13.4 channels, 150 W per channel (8 ohm, 2ch drive)
- Dolby Atmos, DTS:X Pro, IMAX Enhanced, Auro-3D
- 7 HDMI inputs, 3 outputs (1 with eARC), 8K capable
- Audyssey MultEQ XT32; Dirac Live optional upgrade
- 4 independent subwoofer outputs, 15.4 pre-out
- HEOS built-in, up to three zones
Nuotraukos
8Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos AVR-A10H, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The AVR-A10H is a 13.4-channel AV receiver with 13 power amplifiers rated at 150 W per channel into 8 ohms. It supports speaker layouts up to 7.4.6 and 9.4.4 and decodes Dolby Atmos, DTS:X Pro, IMAX Enhanced and Auro-3D. Dolby Height Virtualization can simulate overhead sound without height speakers. Nine 2-channel DACs serve the 17 processing channels, and the chassis uses a triple-layer construction to reduce vibration.
Video handling includes 8K/60Hz and 4K/120Hz pass-through, upscaling of lower-resolution sources, Dolby Vision, HDR10+, HLG, VRR, QFT and ALLM. There are seven HDMI inputs and three outputs, one with eARC, so a projector and a TV can run together while a separate signal goes to another zone. Room correction is Audyssey MultEQ XT32, with optional Dirac Live and Dirac Live Bass Control licences available as upgrades.
Networking and multi-room audio come from HEOS, controlled through the free HEOS app, with up to three zones. A custom install mode supports third-party integration and Control4 SDDP, and remote monitoring is available for integrators. Four independent subwoofer outputs, a phono (MM) input and a 15.4-channel pre-out are included.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Denon
- Modelis
- AVR-A10H
- Kategorija
- Hi-Fi ir namų garsas › Stiprintuvai
Audio
- Number of power amps
- 13
- Power output (8 ohm, 20Hz - 20kHz, 0.05%, 2ch drive)
- 150 watts per channel
- Power output (6 ohm, 1kHz, 0.7%, 2ch drive)
- 190 watts per channel
- Power output (6 ohm, 1kHz, 10%, 1ch drive)
- 260 watts per channel
- Auto speaker setup by microphone
- Audyssey MultEQ XT32
- Supported speaker configurations
- Up to 7.4.6 and 9.4.4
- DACs
- Nine 2-channel DACs
Inputs
- HDMI in
- 7
- Analog in
- 6+1
- Phono (MM) in
- Yes
- Digital in: optical / coaxial
- 2 / 2
Outputs
- HDMI out
- 3 (1 x eARC)
- Analog out
- 0
- Multichannel pre-out
- Yes (15.4)
- Subwoofer out
- 4 (independent)
- Multi-room out: analog / digital
- 2 / 0
- Number of speaker terminals
- 15
Connectivity
- Speaker A/B
- Assignable
- Bi-amp drive
- Assignable
- Multi-room speaker terminal
- Assignable
- Multi-room streaming
- HEOS
Video
- Video pass-through
- 8K/60Hz and 4K/120Hz
Power
- Power consumption
- 900W
- No-sound consumption (ECO on/off)
- 70W/125W
- Standby consumption
- 0.1W
- CEC standby consumption
- 0.5W
- Network standby consumption
- Less than 2.0W
Physical
- Front display
- 2 Lines FLD
- GUI languages
- 9
- Dimensions w/o antenna (W × D × H)
- 17.1 × 18.6 × 7.7 in
- Dimensions with antenna, horizontal (W × D × H)
- 17.1 × 19 × 7.7 in
- Dimensions with antenna, vertical (W × D × H)
- 17.1 × 19 × 10.2 in
- Weight
- 52 lbs
In the box
- System remote control
- RC-1261