Ecler HUB1616
16-input, 16-output digital audio zoner with built-in DSP, aimed at installations that need several audio zones managed from one rack unit. It is configured through an embedded web application and can be controlled from wall panels, paging consoles or a mobile app.
- 16 inputs, 16 outputs digital zoner with integrated DSP
- 4 line, 4 mic/line (+48V) and 8 remote RJ45 inputs
- Hangar web app setup; pilot app for Android/iOS control
- Four priority levels with ducker/pager functions
- 19" rack, 2RU; Ethernet, RS-232 and RS485 remote bus
Nuotraukos
7Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Ecler HUB1616, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The unit is a digital zone manager that takes 16 inputs and routes them to 16 outputs, with DSP available on both inputs and outputs. Each zone (output) can have its own source selection, volume, mute and three-band tone control. Four priority levels with ducker and pager functions allow announcements to override background audio. Available DSP includes frequency shifter, stereo link, delay, crossover filters, 8-band graphic EQ and compressor/limiter.
Setup is done from a web browser through the embedded Hangar application, and predefined setups let a basic installation be running quickly. Day-to-day control is possible from the front panel, from up to 8 eMCONTROL1 wall panels and up to 2 eMPAGE paging consoles, from the Ecler pilot app for Android and iOS, or from third-party systems over the TP-NET protocol.
Inputs comprise 4 line inputs, 4 mic/line inputs with switchable phantom power and 8 remote inputs on RJ45. Outputs are 16 balanced Euroblock lines plus a selectable headphone monitor. It connects over 10/100 Ethernet, RS-232 (DB9) and an RS485 remote bus, and has a dry-contact mute port. It is a 2RU, 19-inch rack unit and the successor to the eMIMO1616.
Specifikacijos
- Gamintojas
- Ecler
- Modelis
- HUB1616
- Kategorija
- Gyvas garsas › PA kolonėlės
Audio
- Processor
- Floating point 32/64bit
- Sampling rate
- 48 kHz
- Resolution
- 24 bit, AKM
- Latency
- <1.5 ms
- Frequency response
- <10Hz ~ 20kHz (+0dB / -0.5dB)
- Dynamic range
- AD:111dB, DA: 115dB
- THD + Noise
- < 0.005% (1kHz, 1Vrms)
Inputs
- Line inputs
- 4 (IN1-4), RCA female, unbalanced; inputs 1 and 2 also on Euroblock
- Mic/Line inputs
- 4 (IN5-8), Euroblock, balanced
- Remote inputs
- 8 (IN9-16), RJ45, balanced
- Input sensitivity
- Line: +5 / -15dBV; Mic/Line: +0 / -50dBV; Remote: 0 dBV
- Input impedance
- Line: >13kΩ; Mic/Line and Remote: >24kΩ
- Max input level
- 12dBV
- CMRR
- >60dB (20Hz - 20kHz)
- Phantom power
- +48VDC (rear panel switch), Mic/Line
Outputs
- Line outputs
- 16, Euroblock 3-pin, balanced
- Max output level
- 12dBV
- Crosstalk
- >90dB, 20Hz - 20kHz
- Headphones
- Out1 to Out16 selectable, 3.5mm mini-jack (>200mW – 200Ω)
Connectivity
- Ethernet
- 1x RJ-45, 10/100Mb, Auto X-Over, CAT5 up to 100m
- Serial port
- RS-232, DB9
- Remote bus
- RS485
- GPI
- 1, MUTE port
- Programming and control
- Hangar, Ecler pilot (Android/iOS), TPNET (UDP/RS232)
Power
- AC mains
- 100-240 VAC @ 50-60Hz
- AC connector
- C14 IEC
- Power consumption
- 20W
- Secondary power supply
- +12VDC, 0.6A max.
Physical
- Installation
- 19" rack format (2RU)
- Dimensions (WxHxD)
- 482.6 x 88.0 x 200.0 mm / 19.0 x 3.5 x 7.9 in.
- Weight
- 3.66 kg / 8.07 lb
- Operating temperature
- -10°C to 40°C / 14°F to 104°F
- Operating humidity
- <85% HR
Software
- Configuration software
- Hangar embedded web application