PAGE-X10D
Desktop paging console with a 10-inch capacitive touchscreen and an included cardioid gooseneck condenser microphone. It sends voice announcements over Dante/AES67 or an analogue output and is aimed at EclerPLEX installations in retail, education, corporate, sports, wellness and hospitality venues.
- 10" capacitive touchscreen, 1280 x 800 IPS
- Cardioid gooseneck condenser mic included
- Dante/AES67 with 2 flows, latency 1/2/5 ms
- Balanced Euroblock line output and stereo RCA AUX input
- PoE 802.3af or external 12–24 V DC power
- Configured through EclerPLEX
Nuotraukos
8Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos PAGE-X10D, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
PAGE-X10D is a desktop paging station built around a 10-inch IPS touchscreen with a 1280 x 800 resolution and 10-point capacitive touch. It is operated through the EclerPLEX ecosystem, where the paging zones are configured, and it runs on a quad-core ARM processor.
Audio comes from the supplied cardioid condenser gooseneck microphone, which has a 100 Hz, 18 dB/oct high-pass filter on the microphone itself. A stereo RCA line input is available for an external auxiliary source and is summed to mono on Dante channel 2. Microphone gain is set with a potentiometer reachable with a screwdriver. The unit has Reboot and Factory Reset micro buttons.
A single RJ45 port carries Ethernet, PoE and Dante/AES67 audio with two flows, and Dante and control traffic can be separated. Latency is selectable at 1, 2 or 5 ms. A balanced 3-pin Euroblock line output is also provided. Power comes from PoE (802.3af) or from an external 12–24 V DC supply, which is not included.
Specifikacijos
- Gamintojas
- Ecler
- Modelis
- PAGE-X10D
- Kategorija
- Gyvas garsas › Kita gyvo garso įranga
System
- Output channels
- 1 Line + 2 Dante®/AES67
- Input channels
- 1 Mic + 1 Line (Stereo Sum)
- Paging zones
- Configurable via Ecler PLEX
- Processor
- Quad-Core ARM, up to 1.8GHz
Microphone input
- Microphone type
- Condenser
- Polar pattern
- Cardioid
- Frequency response
- 80Hz-18KHz
- Sensitivity
- -32dB (0dB=1V/Pa at 1 kHz)
- Phantom power
- 11 - 52 VDC
- Input connection type
- XLR
- Filters
- High-pass-filter: 100Hz, 12dB/oct ON/OFF by internal jumper or 100 Hz, 18 dB/oct on the MIC
Line input
- Input connection type
- RCA stereo (sum to mono on Dante CH2)
- Input sensitivity
- -10dBV
- Input gain
- -20dBV / 0dBV
- Input impedance
- >10kΩ
Outputs
- Line output connection
- Euroblock, 3-pin, balanced
Audio over IP
- Protocols
- Dante®/AES67 (2 flows)
- Digital output ports
- 2
- Latency
- 1 / 2 / 5 ms (selectable)
Display
- Size
- 10"
- Resolution
- 1280 x 800 pixels
- Contrast ratio
- 1000:1
- Brightness
- 500 cdm2
- Aspect ratio
- 16:9
- Touch panel
- 10 points capacitive touch panel
Connectivity
- Ethernet
- 1 x RJ45, Base-Tx 10/100Mb / 1GB CAT5e or better up to 100m, supports PoE
- Programming and control
- Ecler PLEX Guest for Panels
- Control buttons
- Reboot and Factory Reset micro buttons
Power
- Power supply
- DC 12V-24V 2A & PoE (Power Supply Not Included)
- PoE
- Class 0 802.3af PoE PD compliant
- Max power consumption
- 12W from 12V external supply; 15W from PoE
Physical
- Format
- Desktop Paging Station
- Dimensions (W x H x D)
- 260 x 145 x 165 mm / 10.24 x 5.71 x 6.50 in.
- Weight
- 1.775 Kg / 3.91 lb
- Operating temperature
- -10°C to 60°C / 14°F to 140°F
- Operating humidity
- ≤75% HR
- Storage temperature
- -20°C to 70°C / -4°F to 158°F
In the box
- Included accessories
- 3-pin Euroblock Connector
- Optional accessories
- PSU-24V2A
Software
- Software
- Ecler Discovery v1.00