Nano Metal Muff
The Nano Metal Muff is a compact analog high-gain distortion pedal with a three-band EQ and a built-in noise gate. It is aimed at guitarists who want heavy metal tones in a pedalboard-friendly enclosure.
- Analog high-gain distortion for metal tones
- Three-band EQ: bass ±14 dB, mid ±15 dB, treble ±10 dB
- Noise gate with threshold knob and indicator LED
- Buffered bypass
- 9V battery included; optional 9.6VDC-200mA adapter
- Compact enclosure, 4.5 x 2.75 x 2.1 in
Nuotraukos
7Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Nano Metal Muff, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The Nano Metal Muff combines a high-gain distortion circuit with a wide-range EQ section, voiced for heavy metal playing. Volume and distortion knobs set the output level and the amount of input gain and saturation, while bass, mid and treble controls give cut and boost of up to 14 dB, 15 dB and 10 dB respectively.
A noise gate with its own threshold knob mutes the output when the incoming signal falls below the set level, which removes hum between phrases. A dedicated LED shows when the gate is muting the output, and turning the gate knob fully counter-clockwise disables it.
The pedal has a quarter-inch input and output, with a 1MΩ input impedance and a 600Ω output impedance. It uses buffered bypass, so the output stays connected to the input through a buffer when the effect is off. Power comes from a 9V battery that is included, or from an optional 9.6VDC-200mA adapter sold separately.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Electro-Harmonix
- Modelis
- Nano Metal Muff
- Kategorija
- Efektai ir pedalai
Audio
- Circuit
- Analog
- Audio
- Mono
- Bypass
- Buffered Bypass
- Bass control
- +/- 14dB of cut or boost
- Mid control
- +/- 15dB of cut or boost
- Treble control
- +/- 10dB of cut or boost
Controls
- Knobs
- Volume, Gate, Distortion, Treble, Mid, Bass
- Footswitch
- Bypass footswitch with status LED
- Gate indicator
- LED shows when the output signal is muted
Inputs
- Input jack
- ¼"
- Input impedance
- 1MΩ
Outputs
- Output jack
- ¼"
- Output impedance
- 600Ω
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 24 mA
Physical
- Dimensions (in)
- 4.5 x 2.75 x 2.1
In the box
- Battery
- 9V battery included