ELEMENTS MK2 115 Sub A
Active 15-inch bass-reflex subwoofer with a 1500 W RMS Class D biamped amplifier and onboard DSP. It extends the low end of the ELEMENTS MK2 system for music and event use and can be networked over Milan AVB.
- 15" woofer with 3.5" voice coil, bass-reflex cabinet
- 1500 W RMS / 3000 W peak Class D biamped amplifier
- Frequency range 38 Hz (-6 dB) / 35 Hz (-10 dB) to crossover
- Milan AVB digital audio over Ethercon RJ45
- 10-band parametric EQ DSP with DSP-Control software
- 39.4 kg, hybrid housing with Multigrip handles
Nuotraukos
6Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos ELEMENTS MK2 115 Sub A, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The ELEMENTS MK2 115 Sub A is a powered subwoofer built around a single 15-inch woofer with a 3.5-inch voice coil in a bass-reflex cabinet. A Class D biamped amplifier delivers 1500 W RMS (3000 W peak). The response reaches down to 38 Hz at -6 dB and 35 Hz at -10 dB, and the passive crossover point to the satellite output is set at 175 Hz. Maximum SPL is 126 dB average and 128 dB peak.
A DSP preamp provides a 10-band parametric EQ with variable filter characteristics, high-pass and low-pass filters, polarity, a delay on the DSP output of up to 50 ms, a limiter and mute. Four filter presets are available: Flat, Contour, Voice and Remote. RMS and peak limiters protect the driver. The unit can be controlled from a computer with the DSP-Control software for Windows and Mac.
Connections include a balanced XLR/jack analog input, balanced XLR analog and DSP outputs, an E-Connect MK2 output for satellites, and two Ethercon RJ45 network ports for Milan AVB digital audio. The cabinet is a hybrid housing with water-based acrylic enamel, HK Audio Multigrip handles and a steel front grille with anticorrosive coating and acoustic foam backing. A top lid is included.
Specifikacijos
- Gamintojas
- HK Audio
- Modelis
- ELEMENTS MK2 115 Sub A
- Kategorija
- Gyvas garsas › PA kolonėlės
System
- Concept
- Active subwoofer
- Cabinet principle
- Bass reflex
- Low frequency driver
- 1x 15" with 3,5" VC
- Crossover
- Active
- Crossover frequency
- 175 Hz
- Frequency range -6 dB
- 38 Hz - X-Over
- Frequency range -10 dB
- 35 Hz - X-Over
- Max. SPL average
- 126 dB
- Max. SPL peak
- 128 dB
- Max. SPL calculated
- 130 dB
Inputs and outputs
- Analog input
- 1 x XLR/jack balanced
- Analog output
- 1 x XLR balanced
- DSP output
- 1 x XLR balanced
- Satellite output
- 1 x E-Connect MK2
- Maximum input level
- 20 dBu
Connectivity
- Network input
- 1 x Ethercon RJ45
- Network output
- 1 x Ethercon RJ45
- Digital audio transmission
- Milan AVB
- Remote software
- DSP-Control
Audio
- Preamplifier
- DSP-preamp
- DSP functions
- Parametric 10-band EQ with variable filter characteristics, high-pass filter, low-pass filter, polarity, Delay DSP-Out (50 ms), limiter, mute
- Filter presets
- Flat, Contour, Voice, Remote
- Sample rate
- 48 kHz
- Latency
- 6 ms
- Speaker protection
- RMS-/Peak-Limiter
Power
- Power amplifier
- Class D - biamped
- Power amplifier output RMS
- 1500 W
- Power amplifier output peak
- 3000 W
- Power consumption
- 2,5 A / 100-240 V nominal according to EN 62368-1
- Power supply
- 1 x IEC 14
Physical
- Cabinet material
- Hybrid housing
- Cabinet surface
- Water based acrylic enamel
- Carrying handles
- HK Audio Multigrip
- Front grille
- Steel front grille with anticorrosive coating and backed acoustic foam
- Dimensions (W x H x D)
- 47,8 cm x 53,1 cm x 68,1 cm (18.82 inch x 20,9 inch x 26.81 inch)
- Weight
- 39,4 kg (86.86 lbs)
In the box
- Accessories included
- 1x Top Lid
Software
- DSP Control (Windows)
- 32/64 bit, v4.3.0.144084, 135.1 MB
- DSP Control (Mac)
- v4.3.0.144084, 146.9 MB