Studio 900 Head
Two-channel valve guitar amp head with 20W output, inspired by the Marshall JCM900. It has switchable 20W, 5W and under 1W power settings, built-in spring reverb and an effects loop, for guitarists who play both rehearsals and studio sessions.
- Two-channel valve guitar amp head, JCM900-inspired
- Switchable power: 20W, 5W and <1W
- Two ECC83 preamp, two 5881 power valves, ECC83 phase splitter
- Built-in spring reverb and effects loop
- DI output plus compensated DI output
- Designed and made in UK, 11.2 kg
Nuotraukos
8Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Studio 900 Head, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The Studio 900 Head is a compact two-channel guitar amplifier built around valves. It recreates the character of the 100W JCM900 at a 20W output, with a clean, crunch and high-gain range of tones. Each channel can be set up separately, so players can move between two distinct sounds.
The power stage can be switched between 20W, 5W and below 1W, which allows the output to be matched to a stage, a rehearsal room or a recording situation. The circuit uses two ECC83 preamp valves, one ECC83 phase splitter and two 5881 power valves, combined with solid-state components in a hybrid design. Controls cover gain, treble, middle, bass, presence and volume, and an integrated spring reverb and an effects loop are included.
The head has five quarter-inch jack sockets for speaker outputs (16Ω, 8Ω and 4Ω loads) and a DI output, with a compensated DI option for recording. It measures 510 x 245 x 240 mm and weighs 11.2 kg. It is designed and made in the UK, in the same Bletchley factory as the original JCM900.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Marshall
- Modelis
- Studio 900 Head
- Kategorija
- Gitaros ir bosai
General
- Model
- SN20H
- Range
- Studio
- Channels
- 2
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- 20W (with power reduction to 5W), <1W
- Controls
- Treble, middle, bass and presence
- Reverb
- Built-in spring reverb
- Effects loop
- Built-in
Valves
- Preamp valves
- 2 x ECC83
- Phase splitter
- 1 x ECC83
- Power amp valves
- 2 x 5881
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load)
- DI outputs
- DI output, Compensated DI output
Physical
- Weight
- 11.2 kg / 24.5 lb
- Width
- 510 mm / 20.1"
- Height
- 245 mm / 9.6"
- Depth
- 240 mm / 9.4"
- Country of origin
- Designed and engineered in UK. Made in UK.