Pick it MM 5
Moving-magnet phono cartridge made by Ortofon and voiced by Pro-Ject, fitted with a nude elliptical stylus. Aimed at turntable owners who want a detailed, wide-staged upgrade for low to medium mass tonearms.
- Moving-magnet cartridge made by Ortofon, voiced by Pro-Ject
- Nude elliptical stylus, r/R 8/18 µm
- Split pole pins for a flat frequency response
- Output 4 mV, 20–25,000 Hz (±2 dB)
- Tracking force 1.6–2 g, recommended 1.8 g
- 1/2 inch mount with threaded holes; replacement stylus sold separately
Nuotraukos
7Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Pick it MM 5, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The Pick it MM 5 is a moving-magnet cartridge produced by Ortofon and tuned by Pro-Ject's design team. It carries a nude elliptical stylus on a cantilever derived from high-end DJ designs, and is intended to bring out fine record detail with a clearly located stereo image and a large sound stage.
It uses Ortofon's split pole pin construction, which gives a frequency response that the maker compares to moving-coil cartridges. The specification lists 20–25,000 Hz (±2 dB), 4 mV output, 25 dB channel separation at 1 kHz and a recommended tracking force of 1.8 g. It suits tonearms of low to medium effective mass.
Mounting follows the 1/2 inch standard, and the body has threaded holes so it can be fitted without nuts. It connects to a phono stage with the recommended load of 47 kΩ and 150–300 pF. The stylus is available separately as a replacement, and the cartridge is made in Europe.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Pro-Ject
- Modelis
- Pick it MM 5
- Kategorija
- DJ įranga › Galvutės ir adatos
Cartridge
- Cartridge principle
- MM (Moving-Magnet)
- Stylus type
- Nude Elliptical
- Stylus tip radius
- r/R 8/18 μm
- Tracking angle
- 20°
- Height stylus tip to top mounting surface
- 18 mm
Audio
- Output voltage
- 4 mV
- Channel separation at 1 kHz
- 25 dB
- Frequency response
- 20 - 25 000 Hz (± 2 dB)
- Trackability (315 Hz, lateral)
- 80 µm
Tracking
- Tracking force, range
- 1,6 - 2 g (mN)
- Recommended tracking force
- 1,8 g (mN)
- Tonearm mass suitability
- Low to medium
Connectivity
- Recommended load resistance
- 47 kΩ
- Recommended load capacitance
- 150 - 300 pF
- Mounting standard
- 1/2 inch, threaded holes
Physical
- Weight
- 7.2 g
- Manufacture
- Made in Europe
- Replacement stylus
- Available separately