Concept 300
Large two-way standmount speaker pair from the Concept series, with a 165mm mid/bass driver and 28mm tweeter in a layered, braced MDF cabinet. Offered with or without the matching Tensegrity stands, for hi-fi listeners who want a compact flagship speaker.
- 2-way reflex standmount, sold as a pair
- 165mm mid/bass driver and 28mm tweeter
- Frequency response 55Hz - 30kHz
- Bi-wire/bi-amp terminals; 4mm banana, spade or bare wire
- Dual Gelcore and Point 2 Point cabinet damping
- Optional Tensegrity stands with isolation base
Nuotraukos
5Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Concept 300, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The Concept 300 is a two-way reflex standmount loudspeaker sold as a pair. Its MDF cabinet uses point-to-point bracing for low-frequency vibrations and a three-layer construction separated by a non-setting gel that turns high-frequency vibration into heat. The finish is multiple gloss lacquer coats combined with real-wood veneer, offered as Black & Rosewood or White & Light Oak.
The 165mm mid/bass cone is impregnated paper with a rubber surround, a 35mm glass fibre voice coil and a ferrite magnet. The 28mm tweeter uses coated microfibre, is decoupled from the cabinet by a rubber gasket and has a shallow horn-shaped front plate. Both drivers are fixed from behind with spring-tensioned bolts, so no bolt heads show on the baffle.
A sprung isolation base plate carries the speaker on four springs. It is designed to pair with the Tensegrity stand, a tripod of stainless steel rods and cables, available as a bundle or bought without stands. The rear panel has electrically isolated terminals for bi-wiring or bi-amping, accepting bare wire, spade connectors or 4mm banana plugs.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Q Acoustics
- Modelis
- Concept 300
- Kategorija
- Hi-Fi ir namų garsas › Kolonėlės
Audio
- Enclosure type
- 2 way reflex
- Mid/bass driver
- 165mm
- High frequency unit
- 28mm
- Frequency response
- 55Hz - 30kHz
- Nominal impedance
- 6ohms
- Minimum impedance
- 4.7ohms
- Sensitivity
- 84dB
- Crossover frequency
- 2.5kHz
- Effective volume
- 11.4L
Power
- Stereo amplifier power
- 25-200w
Connectivity
- Speaker terminals
- Bi-wire / bi-amp, electrically isolated
- Accepted connectors
- Bare wire, spade connectors or 4mm banana plugs
Physical
- Cabinet dimensions H/W/D
- 355 x 200 x 400 mm (14 x 7.9 x 15.7 in)
- Speaker on stand dimensions H/W/D
- 690 x 492 x 430 mm (27.2 x 19.4 x 16.9 in)
- Speaker weight
- 14.5kg (per speaker)
- Carton dimensions H/W/D
- 320 x 500 x 520mm
- Packaged weight
- 16.6kg (per speaker)
- Finishes
- Black & Rosewood; White & Light Oak
Tensegrity Stand
- Stand dimensions H/W/D
- 492 x 690 x 430mm
- Stand weight
- 3.9kg (per stand)
- Stand carton dimensions H/W/D
- 740 x 780 x 460mm
- Stand packaged weight
- 12.3kg (pair)
In the box
- Speakers
- 2 x Concept 300 standmount speaker
- Accessories
- 2 x Foam Bung, 2 x Speaker Grille, 2 x Jumper, 2 x Cleaning Cloth
- Documentation
- 2 x Owner's Manual