Audio-Technica AT4050
Multi-pattern large-diaphragm condenser microphone with a transformerless circuit and a side-address body. Switchable between omnidirectional, cardioid and figure-of-eight patterns, it suits studio recording, broadcast and stage work.
- 1-inch dual-diaphragm condenser capsule
- Omni, cardioid and figure-of-eight patterns
- Max input 149 dB SPL, 159 dB SPL with pad on
- 80 Hz low-cut and 10 dB pad switches
- 48 V phantom power, 3-pin XLR-M output
Nuotraukos
5Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Audio-Technica AT4050, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The AT4050 is a side-address condenser microphone built around a 1-inch dual-diaphragm capsule. Three polar patterns can be selected on the body: omnidirectional, cardioid and figure-of-eight. The dual-diaphragm design is meant to keep the chosen pattern consistent across the frequency range.
The diaphragm is a 2-micron gold-vapour-deposited film that goes through a five-stage ageing process so it keeps its characteristics over years of use. The circuit has no output transformer, which avoids low-frequency distortion and follows fast transients. An acoustically open housing reduces unwanted internal reflections. A switchable 80 Hz low-cut filter and a 10 dB pad are built in.
The microphone is powered by 48 V phantom power and connects through a 3-pin XLR-M output. It comes with the AT8449a shock mount, a 3/8"-5/8" thread adapter, a dust cover and a case. The model is listed as no longer in production.
Specifikacijos
- Gamintojas
- Audio-Technica
- Modelis
- AT4050
- Kategorija
- Studija › Mikrofonai
Audio
- Transducer type
- DC-biased condenser
- Polar patterns
- Omnidirectional, cardioid, figure-of-eight
- Frequency response
- 20–18,000 Hz
- Sensitivity
- -36 dB (15.8 mV) (0 dB = 1 V/Pa, 1 kHz)
- Max input sound level
- 149 dB SPL (1 kHz, THD 1%); 159 dB SPL with pad on
- Noise
- 17 dB SPL
- Dynamic range
- 132 dB (1 kHz at max SPL)
- Signal-to-noise ratio
- 77 dB (1 kHz at 1 Pa, A-weighted)
- Low-cut filter
- 80 Hz, 12 dB/octave
- Pad
- -10 dB
- Output impedance
- 100 Ω
Controls
- Switches
- Polar pattern selector, low-cut on/off, pad on/off
Connectivity
- Output connector
- 3-pin XLR-M
Power
- Phantom power
- 48 V DC, 4.2 mA
Physical
- Finish
- Black matte baked paint
- Weight
- 510 g
- Length
- 188.0 mm
- Maximum body diameter
- 53.4 mm
In the box
- Included
- AT8449a shock mount, 3/8"-5/8" thread adapter, dust cover, case