Ghost Echo
Ghost Echo is a guitar pedal that emulates amp-top spring reverb using analog and digital circuitry. It suits guitarists and synth players who want vintage-style reverb with adjustable pre-delay, decay and mix.
- Analog/digital emulation of amp-top spring reverb
- Attack knob sets pre-delay from 30 ms to about 150 ms
- Dwell sets decay length and self-oscillates near 3 o'clock
- Depth sets wet/dry mix; unity at about noon
- True bypass with relay switching; needs power to pass audio
- 9 V DC, 2.1 mm negative center, 86 mA
Nuotraukos
5Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Ghost Echo, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
Ghost Echo is a compact effects pedal that recreates the sound of older amp-top spring reverb units. The circuit combines analog and digital elements. Three knobs shape the sound: Attack sets the pre-delay, Dwell sets the length of the decay, and Depth sets the wet/dry balance.
Pre-delay runs from about 30 ms to about 150 ms, which covers short slapback-style echoes and longer, more diffuse reverb. Short staccato playing tends to sound like slapback, while sustained legato playing brings out a broad ambient depth. At the top of the Dwell range the reverb self-oscillates, and the Attack control then changes the pitch of the oscillation. Depth reaches unity at about noon, and settings past that boost the wet signal.
The pedal uses true bypass with electronic relay switching, so no audio passes when it is unpowered. It runs from a standard 9 V DC supply with a 2.1 mm negative-center barrel. It is built by hand in Akron, Ohio, and carries a limited lifetime warranty.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- EarthQuaker Devices
- Modelis
- Ghost Echo
- Kategorija
- Efektai ir pedalai
Controls
- Attack
- Pre-delay, 30 ms at minimum to about 150 ms at maximum
- Dwell
- Decay length; self-oscillates from around 3 o'clock
- Depth
- Wet/dry mix; unity around noon, boosted beyond
- Pre-delay range
- 30 ms – 150 ms
Audio
- Effect type
- Analog/digital spring reverb emulation
- Input impedance
- 10 MΩ
- Output impedance
- 1 kΩ
- Bypass
- True bypass, electronic relay-based switching
Power
- Power supply
- 9 V DC
- Connector
- 2.1 mm barrel, negative center
- Current draw
- 86 mA
- Power note
- Audio will not pass without power; do not run at higher voltages
Physical
- Dimensions (in)
- 4.75 x 2.50 x 2.25 in. with knobs
- Dimensions (mm)
- 121 x 64 x 57 mm with knobs
- Artwork
- Matt Horak
- Warranty
- Limited lifetime warranty
Software
- Documentation
- Operation manual available for download