Ecler HUB1408
Rack-mounted digital zone manager with 14 inputs, 8 analogue outputs and built-in DSP, aimed at installations in retail, hospitality, education and similar venues. It is configured through an embedded web application and can be controlled from wall panels, paging consoles or a mobile app.
- 14 inputs, 8 outputs digital zone manager with DSP
- 4 mic/line inputs with switchable +48 V phantom power
- Hangar embedded web app, Ecler pilot app, TP-NET control
- Up to 8 eMCONTROL1 panels and 2 eMPAGE paging consoles
- 2RU 19" rack, 3.60 kg, 20 W consumption
Nuotraukos
5Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Ecler HUB1408, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The unit routes 14 inputs (2 line, 4 mic/line and 8 remote-bus inputs) to 8 balanced line outputs. Each output zone can select its source, with volume, mute and three-band tone control. Four priority levels and ducker/pager functions let announcements override background audio. DSP includes frequency shifter, stereo link, delay, crossover filters, an 8-band graphic EQ and a compressor/limiter, and predefined setups allow a quick plug-and-play installation.
Configuration is done with the embedded Hangar web application from a standard browser. Day-to-day control is available from the front panel, up to 8 eMCONTROL1 wall panels, up to 2 eMPAGE paging consoles, the Ecler pilot app for Android and iOS, or third-party systems through the TP-NET protocol. A dry-contact MUTE port can silence programmed outputs.
Connections include a 10/100 Ethernet port, an RS-232 serial port on DB9, an RS485 remote bus, a 3.5 mm headphone monitor output selectable from outputs 1 to 8, and a 12 V DC auxiliary supply. The unit is a 2RU 19-inch rack device powered from the mains through an IEC C14 inlet.
Specifikacijos
- Gamintojas
- Ecler
- Modelis
- HUB1408
- Kategorija
- Gyvas garsas › PA kolonėlės
Audio
- Processor
- Floating point 32/64bit
- Sampling rate
- 48 kHz
- Resolution
- 24 bit, AKM
- Latency
- <1.5 ms
- Frequency response
- <10Hz ~ 20kHz (+0dB / -0.5dB)
- Dynamic range
- AD:111dB, DA: 115dB
- THD + Noise
- < 0.005% (1kHz, 1Vrms)
Inputs
- Input ports
- 2 (IN1-2) Line; 4 (IN3-6) Mic/Line; 8 (IN7-14) Remote
- Input connectors
- Line: RCA female with Euroblock stack, unbalanced; Mic/Line: Euroblock, balanced; Remote: RJ45, balanced
- Input sensitivity
- Line: +5 / -15dBV; Mic/Line: +0 / -50dBV; Remote: 0dBV
- Input impedance
- Line: >13kΩ; Mic/Line: >24kΩ; Remote: >24kΩ
- Max input level
- 12dBV
- CMRR
- >60dB (20Hz - 20kHz)
- Phantom power
- Mic/Line: +48VDC (rear panel switch)
Outputs
- Output ports
- 8, Line
- Output connectors
- Euroblock, 3-pin, balanced
- Max output level
- 12dbV
- Crosstalk
- >90dB, 20Hz - 20kHz
- Headphones
- From Out1 to Out8 selectable, Mini-Jack 3,5mm (>200mW – 200Ω)
Connectivity
- Ethernet
- 1, RJ-45, 10/100Mb Auto X-Over CAT5 up to 100m
- Serial port
- RS-232 interface with DB9 connector
- Remote control bus
- Remote bus, RS485
- GPIs
- 1, MUTE port
- Programming and control
- Hangar (embedded web application), Ecler pilot (Android/iOS), TPNET (UDP/RS232)
Power
- AC mains requirement
- 100-240 VAC @ 50-60Hz
- AC mains connector
- C14 IEC connector
- Power consumption
- 20W
- Secondary power supply
- +12VDC, 0,6A max. (short circuit protected)
Physical
- Installation
- 19" rack format (2RU)
- Dimensions (WxHxD)
- 482.6 x 88.0 x 200.0 mm / 19.0 x 3.5 x 7.9 in.
- Weight
- 3.60 kg / 7.93 lb
- Operating temperature
- Min: -10°C ; 14°F, Max: 40°C ; 104°F
- Operating humidity
- <85% HR
- Shipping dimensions (WxHxD)
- 550 x 120 x 390 mm / 21.65 x 4.72 x 15.35 in.
- Shipping weight
- 5.6 kg / 12.35 lb
Software
- Optional accessories
- eMCONTROL1 wall panels, eMPAGE paging stations, WPaMIX-T