MR3
Compact powered 2.0 studio monitor pair with 3.5-inch mid-low drivers and 1-inch silk dome tweeters, delivering 18W x 2 RMS. Aimed at home studios, video editing and everyday listening, with balanced TRS, RCA, AUX and Bluetooth 5.4 inputs.
- 52Hz–40kHz frequency response
- 18W x 2 (RMS), SPL up to 92.5dB at 1 m
- 3.5" mid-low drivers, 1" silk dome tweeters
- Balanced TRS, RCA and 3.5mm AUX inputs plus headphone out
- Bluetooth 5.4, connects two devices at once
- Room compensation knobs and ConneX app settings
Nuotraukos
8Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos MR3, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The MR3 is a pair of powered near-field monitors with a 52Hz to 40kHz frequency response. Each speaker uses a 3.5-inch mid-low driver and a 1-inch silk dome tweeter with a dimpled waveguide, in an MDF cabinet intended to limit distortion and resonance. Total output is 18W per side (RMS), with peak SPL of 92.5dB at 1 metre, enough for near-field work or a medium room.
The analog front end and the Texas Instruments Class-D amplifier are configured for 24bit/96kHz operation, and the speakers carry Hi-Res Audio certification. Room compensation is handled by rear High and Low knobs (±6dB at above 10kHz and around 125Hz) plus Low Cutoff, Acoustic Space and Desktop Control settings in the EDIFIER ConneX app.
Inputs include a balanced 1/4-inch TRS, unbalanced RCA and a 3.5mm AUX, along with a Bluetooth 5.4 receiver that can hold two devices at once. A headphone output is provided. The ConneX app also covers Bluetooth playback control, sound effect settings and the user manual.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Edifier
- Modelis
- MR3
- Kategorija
- Studija › Studijiniai monitoriai
Audio
- Total output power (RMS)
- 18W + 18W
- Frequency response
- 52Hz - 40kHz
- Signal-to-noise ratio
- ≥ 85dB (A)
- Peak SPL
- 92.5dB (@ 1 meter)
- Resolution
- 24bit/96kHz
- Amplifier
- Class-D (Texas Instruments)
Drivers
- Drivers
- 3.5" mid-low drivers, 1" silk dome tweeters
- Cabinet
- MDF
Inputs
- Audio inputs
- Balanced ¼-inch TRS, Unbalanced RCA, ⅛-inch stereo (3.5mm AUX), Bluetooth
- Sensitivity (TRS)
- 1228 ± 100mV (+4dBu)
- Sensitivity (RCA)
- 775 ± 50mV
- Sensitivity (AUX)
- 775 ± 50mV
Outputs
- Headphone output
- Yes
Connectivity
- Bluetooth version
- V5.4
- Bluetooth codec
- SBC
- Simultaneous Bluetooth devices
- 2
- App
- EDIFIER ConneX
Room compensation
- High knob
- ± 6dB above 10kHz
- Low knob
- ± 6dB around 125Hz
- App settings
- Low Cutoff, Acoustic Space, Desktop Control
Physical
- Dimensions (active speaker, W x H x D)
- 125.5mm x 220mm x 185mm
- Dimensions (passive speaker, W x H x D)
- 125.5mm x 220mm x 176mm
- Net weight
- 3.85kg