Frequency Analyzer
Analog ring modulator pedal that adds and subtracts a chosen frequency from the played note or chord, with filters to limit cross distortion. Suited to guitarists and synth or electronic players after moving, inharmonic textures.
- Analog ring modulator with controllable high-order filters
- Shift knob covers a range of four to five octaves
- Fine knob tunes Shift across almost an octave
- Separate dry and effect output jacks
- True bypass, mono, die-cast chassis
- 40VDC 100mA adapter included; 30mA draw
Nuotraukos
8Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Frequency Analyzer, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The Frequency Analyzer is an analog ring modulator in a die-cast pedal housing. A Shift control sets the base frequency across a four to five octave range, and a Fine control trims it over close to an octave. The chosen frequency is both added to and subtracted from the incoming note or chord, creating moving harmonies. A Blend control mixes the processed signal with the original, and can filter the original note out.
Unlike many ring modulators, this one has controllable high-order filters. A filter switch engages them to reduce cross distortion and bring out the variations in the tone. The pedal uses true bypass switching and a mono audio path.
There is a quarter-inch input and two quarter-inch outputs: one carries the effect signal and a separate dry output passes the input signal through. It runs from the supplied 40VDC 100mA adapter and draws 30mA. The model first appeared in 2008 and was discontinued in 2023.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Electro-Harmonix
- Modelis
- Frequency Analyzer
- Kategorija
- Efektai ir pedalai
Audio
- Circuit
- Analog
- Audio
- Mono
- Bypass
- True Bypass
- Effect type
- Ring Modulator
Controls
- Blend knob
- Filters out your original note
- Fine knob
- Fine tuning of the Shift control, covers almost an octave
- Shift knob
- Basic frequency, range of four to five octaves
- Filter switch
- Yes
- Footswitch
- Engages and disengages the effect
Inputs
- Input jack
- ¼" audio input
Outputs
- Dry out jack
- ¼" output of the input signal
- Effect out jack
- ¼" output of the effect
Power
- Power supply
- 40VDC-100mA power adapter included
- Current draw
- 30mA
Physical
- Dimensions (in)
- 4.75 x 4 x 2.25
- Chassis
- Die-cast
In the box
- Power adapter
- 40VDC-100mA included