PLASMA Pedal
A guitar distortion pedal that clips the signal by passing it through a xenon-filled gas discharge tube, producing an audible electrical arc. It has Voltage, Blend and a two-band EQ, and suits guitarists after extreme fuzz and gated tones.
- Clips the signal with a xenon-filled gas discharge tube
- Signal is amplified up to 3500 V to create the arc
- Voltage knob sets the threshold, from sustain to gated
- Blend knob mixes in the clean signal or other effects
- Two-band EQ with a switch for plasma-only or plasma plus clean
- Power supply not included: 9V DC, centre-negative
Nuotraukos
8Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos PLASMA Pedal, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The Plasma Pedal replaces the usual diode, transistor or valve clipping stage with a different method. The input signal is stepped up to as much as 3500 volts and drives an electrical arc between two electrodes in a xenon-filled gas discharge tube. The arc is visible as a blue light on the front panel. An analog rectifier circuit then converts the discharges back to audio level.
The Voltage knob sets the signal threshold needed to make a connection in the tube, which moves the sound between open, sustaining distortion and chopped, sputtery gated tones. A Blend knob mixes the plasma distortion with the clean signal or with other effects and gain stages. An on-board EQ offers low and high boosts and cuts, and a toggle switch applies it either to the plasma signal only or to both the plasma and clean signals.
The pedal has a 1/4" unbalanced input and output plus a DC input for a standard centre-negative 9V supply. No power supply is included, and the unit needs at least 250 mA.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Gamechanger Audio
- Modelis
- PLASMA Pedal
- Kategorija
- Efektai ir pedalai
Inputs
- Input type
- 1/4" Unbalanced TS
- Input impedance
- 1MΩ
- Max input level
- 7Vpp (+10dBu)
Outputs
- Output type
- 1/4" Unbalanced TS
- Output impedance
- 100Ω
- Max output level
- 7Vpp (+10dBu)
Audio
- Frequency response
- 20Hz to 22kHz
- EQ low frequency boost/cut
- ± 9dB, 600Hz corner freq.
- EQ high frequency boost/cut
- ± 10dB, 1.5kHz corner freq.
- Maximum signal voltage in tube
- Up to 3500 V
Connectivity
- Connectors
- IN, OUT, DC input
- Indicator
- White check indicator LED
Power
- Power connector
- Center negative, 2.1 x 5.5 mm barrel plug (the standard 9V)
- Power requirements
- 300mA, 9VDC
- Peak power consumption
- 2.7 W
- Mean power consumption
- 1 W
- Power consumption during stand-by
- 0.025 W
Physical
- Dimensions
- 148 mm * 96 mm * 70 mm
- Weight
- 840 g / 1.8 lbs
In the box
- Power supply
- Not included