Highline Stereo
Stereo passive line isolator with two Jensen 1:1 transformers, made for guitarists and bassists who run amp modelers on a pedalboard. It links the modeler's unbalanced outputs to a mixer or PA over balanced XLR, in stereo or summed to mono.
- Two-channel passive line isolator
- Jensen 1:1 transformers on both channels
- Balanced XLR outputs for long cable runs
- Blocks phantom power from reaching the pedalboard
- XLR Sum and Thru Sum switches for stereo or mono
- Thru outputs for local stage amp monitoring
Nuotraukos
7Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos Highline Stereo, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The Highline Stereo is a two-channel passive isolator that sits between an amp modeler or pedalboard and a mixer, PA or recording system. Each channel uses a Jensen 1:1 transformer, so the signal keeps its line-level volume while ground loop noise is removed through galvanic isolation. The balanced outputs allow long cable runs to the PA, and the unit blocks phantom power so it cannot reach the pedalboard.
Two summing switches change how the unit is routed. The XLR Sum option combines both channels into a single XLR output when channel count at the PA is limited, while the Thru outputs can stay in stereo. The Thru Sum option feeds both channels to one stage amp for local monitoring while the XLR outputs remain stereo. The Thru outputs can also drive one or two stage amplifiers.
The unit is designed to attach to a pedalboard and can be mounted under it with Radial TrainTrack Plus brackets. Radial DI rack adapters such as the J-Rak 4 and J-Rak 8 are listed as related accessories.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Radial Engineering
- Modelis
- Highline Stereo
- Kategorija
- Gyvas garsas › Kita gyvo garso įranga
Audio
- Type
- Stereo passive line isolator
- Channels
- 2
- Transformers
- Jensen, 1:1 ratio
- Isolation
- Galvanic isolation, eliminates ground loop noise
- Phantom power
- Blocked from reaching the pedalboard
Outputs
- Main outputs
- Balanced XLR
- Thru outputs
- Stereo Thru outputs
- XLR Sum switch
- Sums both channels to the XLR output
- Thru Sum switch
- Feeds both channels to a single stage amp
Connectivity
- Source connection
- Unbalanced 1/4" from amp modelers or pedalboard
- Stage amp monitoring
- One or two stage amplifiers via Thru outputs
- Destination
- Mixer, PA or recording system
Power
- Power requirement
- Passive, no power required
Physical
- Pedalboard mounting
- Compatible with TrainTrack Plus brackets
- Part number
- R800 1539 00
Software
- Documentation
- User guide and owner's manual available