1176LN
Hand-built 2U rackmount FET limiting amplifier reproducing the Blackface 1176LN, with a Class A output stage and a custom output transformer. Suited to tracking and mixing vocals, drums, bass and guitars, or to adding colour with little or no compression.
- FET limiting amplifier in a 2U rack chassis
- Attack 20 to 800 µs, release 50 ms to 1.1 s
- Ratios 4:1, 8:1, 12:1, 20:1 plus All Buttons In mode
- Class A output stage with custom output transformer
- XLR and barrier strip audio connectors
- Hand-built in USA; 1-year limited warranty
Nuotraukos
5Skelbimai
Šio modelio skelbimų dar nėra
Kai kas nors parduos 1176LN, skelbimai ir pardavimų istorija atsiras čia.
Parduoti tokįAprašymas
The 1176LN Classic Limiting Amplifier is a hardware reproduction of the 1176 designed by Bill Putnam Sr. It is modelled on the 1176LN, blackface, D and E revisions. Compression is controlled by adjustable attack (20 to 800 microseconds) and release (50 milliseconds to 1.1 seconds). Four push-button ratios are provided: 4:1 and 8:1 for compression, 12:1 and 20:1 for limiting. Pressing all ratio buttons together gives the distinctive "All Buttons In" mode, with more distortion and a different response to transients.
The signal path includes a Class A line-level output amplifier and a custom-built output transformer designed by Putnam, including the extra windings that provide the feedback signal to the output stage. The unit can also be used with compression turned off, to add the tone of its amplifiers and transformers. Each unit is built and tested by hand at the UA Custom Shop in Santa Cruz, California, and carries a 1-year limited warranty.
Connections are XLR and a barrier terminal strip for audio, with a detachable IEC mains inlet and switchable 115V/230V operation. Two units can be linked for stereo operation using the optional 1176-SA accessory.
Vaizdo įrašas
Specifikacijos
- Gamintojas
- Universal Audio
- Modelis
- 1176LN
- Kategorija
- Studija › Preampai ir outboard
Audio
- Frequency response
- 20 Hz – 20 kHz, ±1 dB
- Total harmonic distortion
- Less than 0.5%, 50 Hz to 15 kHz with limiting, at 1.1 seconds release setting and +22.5 dBu output
- Signal-to-noise ratio
- Greater than 81 dB, 30 Hz – 18 kHz with input signal at threshold of limiting
- Gain
- 45 dB, ±1 dB
- Attack time (adjustable)
- 20 to 800 microseconds
- Release time (adjustable)
- 50 milliseconds to 1.1 seconds
- Ratios
- 4:1, 8:1, 12:1, 20:1
Inputs
- Maximum input level
- +30 dBu
- Input impedance
- 600 Ω, bridged T-control, floating
Outputs
- Maximum output level
- +24 dBu
- Output impedance
- 600 Ω, transformer-balanced, floating
Connectivity
- Audio connectors
- XLR and barrier terminal strip
- Stereo interconnection (two 1176LN units)
- Via optional 1176-SA accessory
Power
- AC power requirements
- 115V or 230V (switchable)
- Maximum power consumption
- 13 Watts
- Power input connection
- Standard detachable IEC
- Fuse
- 115V: T 125 mA L time delay (slow blow); 230V: T 63 mA L time delay (slow blow)
Physical
- Dimensions (2U rackmount chassis)
- 19" W x 3.5" H x 12.25" D
- Weight (bare unit)
- 11 lbs
- Weight (shipping)
- 14.5 lbs
- Warranty
- 1-year limited warranty